Previous product
US89 Pushbutton
Back to products
Next product
US90-15 Pushbutton

US90-EN Pushbutton

The US90-EN Pushbutton is a classic square button designed to meet the requirements of EN81-70. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the legend itself illuminates brightly and you have the choice of many colour options.

  • 15mm high tactile legend
  • High contrast between legend and pressel
  • Legend and halo illumination
  • Vandal resistant EN81-71 cat 2
  • Large range of pressel legends
  • Standard pressels are a black plate moulded with opal polycarbonate
Category:
Description

Pushbutton Options

Body Type

Compact 2

  • High grade polycarbonate
  • LED current 20mA
  • Spade or screw terminals
  • Shunt boards for easy installation
  • 2 n/o, 1 n/o & 1 n/c or 2 n/c contacts as standard
  • UL/CSA approved

Compact 2 Micro

  • Micro movement
  • Very shallow <20mm
  • High grade polycarbonate
  • Vandal resistant and durable
  • LED current 20mA
  • Wide range of connector options
  • 1 n/o contact only (other options available through a relay board)
  • UL/CSA approved

Compact 3

  • Shallow
  • High grade polycarbonate
  • Vandal resistant and durable
  • LED current 20mA
  • Spade or screw terminal
  • Shunt boards for easy installation
  • 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
  • UL/CSA approved

Compact 3 Profile

  • Micro movement
  • Shallow, less than 20mm deep
  • High grade polycarbonate
  • Vandal resistant and durable
  • LED current 20mA
  • Spade or screw terminal
  • Push in Wago connectors
  • Cable size up to 0.75mm2
  • 2n/o, 1 n/o and 1n/c or 2n/c contacts as standard
  • UL/CSA approved

Click options above for more detail

Material Finish

  • Black Black
  • Green Exit Door Green Exit Door
  • Yellow Alarm Yellow Alarm

Illumination Colour

  • RedRed
  • AmberAmber
  • GreenGreen
  • BlueBlue
  • WhiteWhite

Illumination Action

Single

  • Before call acceptance – Both legend and halo are NON illuminated
  • After call acceptance – Both legend and halo illuminated at FULL brightness any colour

Dual

  • Before call acceptance – Both legend and halo are DIM illuminated any colour.
  • After call acceptance – Both legend and halo are illuminated at FULL brightness any colour.

Note: DIM and FULL brightness are the same colour.

Bicolour

  • Before call acceptance – Both legend and halo are DIM illuminated white.
  • After call acceptance – Both legend and halo illuminated at FULL brightness with any available colour.

Note: Due to DIM colour (white) adding to FULL brightness colour. FULL colour is not quite the same as FULL Single or Dual, as colour can be slightly lighter.

Bicolour +

  • Before call acceptance – Both legend and halo are illuminated with any BACKGROUND (initial) colour.
  • After call acceptance – Both legend and halo are switched to any other illuminated FULL brightness colour.

Note: BACKGROUND and FULL brightness colours, can be any available colour and different to one another.

Click options above for more detail

Product Enquiry

Related products

Close

US95 Pushbutton

The circular shaped US95 Braille Pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel background can be either black, providing good contrast with legend and faceplate (US95EN), or stainless steel.
  • 15mm high tactile legend with Braille
  • Legend and halo illumination
  • Vandal resistant EN81-71 cat 2
  • Large range of pressel legends
  • Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
Quick view
Close

M-20 REB Pushbutton

The M-20 REB pushbutton with Braille has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button fully meets the requirements of EN81-70, having contrast between the legend and the pressel, with the added advantage of Standard English Braille. The M-20 has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
  • No studding required
  • Separate legend and halo illumination
  • Large range of pressel legends
  • High contrast ratio between pressel and legend
  • 15mm high tactile legend + Braille (Moulded through)
  • Meets EN81-70
Quick view
Close

US100 Pushbutton

The US100 Pushbutton is the most vandal resistant of the pushbuttons within our range. The stainless steel pressel is set within a stainless steel bezel, which it bottoms out on, making it highly resistant to impact attacks. Illumination is provided through a small insert moulded lens in the centre of the button. Although the US100 is extremely vandal resistant, its clean lines have made it very popular and it has been used in some of the most prestigious installations around the world as well as some of the harshest.
  • Classic design
  • Highly vandal resistant exceeds EN81-71 category 2
  • Pressel/surround assembly is locked to the faceplate
Quick view
Close

Jumbo US96-30 Pushbutton

The US96-30 Braille Jumbo Pushbutton is a classic square extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US96-30 Jumbo has an identical appearance to the standard US96 and so the two buttons can be used on faceplates together when appropriate. The US96-30 is available with the standard body or low profile, a useful option for surface mount.
Quick view
Close

US92 Pushbutton

The US92 Pushbutton is a classic circular button with a clean timeless appearance. It has a black surround with an opal pressel, which is covered by a clear cap. On call acceptance the whole of the opal pressel illuminates and there are a wide variety of colour options.
  • 15mm legend
  • Classic Design
  • Complete pressel illumination
  • Range of pressel legends
  • Meets EN60529 (IP54)
Quick view
Close

Jumbo US91-30EN Pushbutton

The US91-30EN Jumbo Pushbutton is a classic round extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
Quick view
Close

US85 Pushbutton

The US85 benefits uses the full range of square Jumbo pressels.  The button was designed not only to meet the requirements of EN81-70 Annex G.1, but also for use in larger buildings such as hospitals, airports and shopping centres, where the shear scale of the building necessitates a larger button.  Using the EN range you have a black background with tactile legend (Braille optional) and this provides the contrast for EN81-70. Also available are stainless steel pressels again with tactile legends and optional Braille
  • 30mm high tactile legend with optional Braille
  • Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication of position or call acceptance
  • Large range of pressel legends
  • Matching range includes keyswitches, rocker switches and indicators
  • Vandal resistant
Quick view
Close

M-20 RET Pushbutton

The M-20 RET pushbutton has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button fully meets the requirements of EN81-70, having contrast between the legend and pressel. The M-20 has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
  • No studding required
  • Separate legend and halo illumination
  • Large range of pressel legends
  • High contrast ratio between pressel and legend
  • 15mm high tactile legend (Moulded through)
  • Meets EN81-70
Quick view
Close

US89 Pushbutton

The timeless design of the US89 Pushbutton has proven to be very successful over the years. The obround shape is a refreshing alternative to the more common round or square shape.The US89 is available with Compact 2, Compact 3 or Compact 3P bodies. The illuminated tactile legend clear identification and the button can be illuminated in a wide variety of colours.
  • 13mm high tactile legend
  • Legend & halo illumination
  • Vandal resistant with stainless steel front EN81-71 cat 2
  • Large range of pressel legends
  • Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
Quick view
Close

Jumbo US91-30 Pushbutton

The US91-30 Jumbo Pushbutton is a classic round extra large button which meets all the requirements of the visually impaired. As well as the 30mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
  • 30mm high tactile legend
  • Matches standard US91-15 Compact 2 range
Quick view
Close

Jumbo US95-30 Pushbutton

The US95-30 Braille Jumbo Pushbutton is a classic round extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend with illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US95-30 Jumbo has an identical appearance to the standard US95 and so the two buttons can be used on faceplates together when appropriate.
Quick view
Close

US91-15 Pushbutton

The US91-15 Braille Pushbutton meets all the requirements of the visually impaired. As well as the 15mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The illuminated tactile legend provides clear identification and the button can be illuminated in a wide variety of colours.
  • 15mm tactile legend with Braille
  • A halo of light between the pressel and surround via a patented hidden recess encircles the pressel and illuminates the legend
  • Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication of position or call acceptance
  • Large range of pressel legends
  • Matching range includes keyswitches, rocker switches and indicators
  • Vandal resistant with stainless steel front
  • Meets EN81-1/2, EN81-71 (Category 2), EN81-72, EN81-73, EN60529 (IP54), AS1735 Part12 with H/C surround & dual illumination
Quick view