Previous product
Jumbo US91-30 Pushbutton
Back to products
Next product
Jumbo US95-30EN Pushbutton

Jumbo US95-30 Pushbutton

The US95-30 Braille Jumbo Pushbutton is a classic round extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend with illuminates brightly and you have the choice of many colour options. The Braille dots below the legend are Standard English Braille. The US95-30 Jumbo has an identical appearance to the standard US95 and so the two buttons can be used on faceplates together when appropriate.

Categories: ,
Description

Key Features

The US95-30 is available with the standard body or low profile, a useful option for surface mount.

  • Legend and halo illumination
  • Large range of pressel legends
  • 30mm high tactile legend (moulded through)
  • Vandal resistant EN81-71 cat 2
  • High contrast ratio between pressel and legend
  • Meets EN81-70

Pushbutton Options

Body Type

Jumbo

  • High grade polycarbonate
  • LED current 20mA
  • Shunt boards for easy installation
  • 2 n/o or 1n/o and 1 n/c contacts
  • UL/CSA approved

Jumbo Profile

  • Very shallow <20mm
  • High grade polycarbonate
  • LED current 20mA
  • Shunt boards for easy installation
  • 2 n/o or 1n/o and 1 n/c contacts
  • UL/CSA approved

Click options above for more detail

Material Finish

  • Brushed Stainless Steel Brushed Stainless Steel
  • Mirror Stainless Steel Mirror Stainless Steel
  • Brushed Brass Brushed Brass
  • Mirror Brass Mirror Brass

Illumination Colour

  • RedRed
  • YellowYellow
  • GreenGreen
  • BlueBlue
  • WhiteWhite

Amber option also available

Illumination Action

Single

  • Before call acceptance – Both legend and halo are NON illuminated
  • After call acceptance – Both legend and halo illuminated at FULL brightness any colour

Dual

  • Before call acceptance – Both legend and halo are DIM illuminated any colour.
  • After call acceptance – Both legend and halo are illuminated at FULL brightness any colour.

Note: DIM and FULL brightness are the same colour.

Bicolour +

  • Before call acceptance – Both legend and halo are illuminated with any BACKGROUND (initial) colour.
  • After call acceptance – Both legend and halo are switched to any other illuminated FULL brightness colour.

Note: BACKGROUND and FULL brightness colours, can be any available colour and different to one another.

Click options above for more detail

Product Enquiry

    Additional information
    Product Shape

    Round

    Product Finish

    Brushed Brass, Brushed Stainless Steel, Mirror Brass, Mirror Stainless Steel

    Body Type

    Jumbo, Jumbo Profile

    Illumination Colour

    Red, Amber, Green, Blue, White

    Illumination Action

    Single, Dual, Bicolour+

    Related products

    Close

    US100 Pushbutton

    The US100 Pushbutton is the most vandal resistant of the pushbuttons within our range. The stainless steel pressel is set within a stainless steel bezel, which it bottoms out on, making it highly resistant to impact attacks. Illumination is provided through a small insert moulded lens in the centre of the button. Although the US100 is extremely vandal resistant, its clean lines have made it very popular and it has been used in some of the most prestigious installations around the world as well as some of the harshest.
    • Classic design
    • Highly vandal resistant exceeds EN81-71 category 2
    • Pressel/surround assembly is locked to the faceplate
    Quick view
    Close

    US94 Pushbutton

    The US94 Pushbutton is a classic square button with a clean, timeless appearance. It has a black surround with an opal pressel, which is covered by a clear cap. On call acceptance the whole of the opal pressel illuminates and there are a wide variety of colour options.
    • 15mm legend
    • Classic design
    • Complete pressel illumination
    • Range of pressel legends
    • Meets EN60529 (IP54)
    Quick view
    Close

    Jumbo US90 Pushbutton

    The US90 Jumbo Pushbutton is a classic square extra large button. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheet scale of the building necessitates a larger button. On call acceptance the large 30mm high tactile legend illuminates brightly and you have the choice of many colour options. The US90 Jumbo has an identical appearance to the standard US90 and so the two buttons can be used on faceplates together when appropriate.
    • 30mm high tactile legend
    • Matches standard US90 Compact 2 range
    • Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication of position or call acceptance
    • Matching range includes keyswitches, rocker switches and indicators
    • Meets EN81-1/2, EN81-71 (Category 2), EN81-72, EN81-73, EN60529 (IP54)
    • Two body depths available, standard and low profile
    • A halo of light between the pressel and surround via a patented hidden recess encircles the pressel and illuminates the legend
    • Large range of pressel legends
    • Vandal resistant with stainless steel front
    Quick view
    Close

    Jumbo US91-30EN Pushbutton

    The US91-30EN Jumbo Pushbutton is a classic round extra large button. The button was designed not only to meet the requirements of EN81-70 Annex G.1., but also for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
    Quick view
    Close

    US92 Pushbutton

    The US92 Pushbutton is a classic circular button with a clean timeless appearance. It has a black surround with an opal pressel, which is covered by a clear cap. On call acceptance the whole of the opal pressel illuminates and there are a wide variety of colour options.
    • 15mm legend
    • Classic Design
    • Complete pressel illumination
    • Range of pressel legends
    • Meets EN60529 (IP54)
    Quick view
    Close

    Jumbo US91-30 Pushbutton

    The US91-30 Jumbo Pushbutton is a classic round extra large button which meets all the requirements of the visually impaired. As well as the 30mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The button was primarily designed for use in larger buildings such as hospitals, airports and shopping centres, where the sheer scale of the building necessitates a larger button. On call acceptance the large 30mm high legend illuminates brightly and you have the choice of many colour options.
    • 30mm high tactile legend
    • Matches standard US91-15 Compact 2 range
    Quick view
    Close

    US91-BB Pushbutton

    The US91-BB slick design has a halo illumination and is vandal resistant.  Two finish options are available: turned brass inner with mirrored stainless steel outer or turned stainless steel inner with mirrored stainless steel outer.
    • Halo illumination
    • Meets EN81-71 cat 2
    • Vandal resistant with stainless steel & brass front
    • Meets B44 & California Code
    Quick view
    Close

    US91 Optic Pushbutton

    The US91 OPTIC C3/C3P Pushbutton is a modern twist on a classic – a clean timeless appearance. The illuminated Braille Tag shows clear identification and can be illuminated in a wide variety of colours. The US91 Optic is available with any of our standard circular pressels be that the Belly Button (shown here), the classic US91 blank, bulls-eye or legend – the choice is yours.
    Quick view
    Close

    US95 Pushbutton

    The circular shaped US95 Braille Pushbutton meets all the requirements of the visually impaired. The wide tactile legend can be easily seen from all angles and can be illuminated in a variety of colours. The Braille dots below the legend are Standard English Braille. The pressel background can be either black, providing good contrast with legend and faceplate (US95EN), or stainless steel.
    • 15mm high tactile legend with Braille
    • Legend and halo illumination
    • Vandal resistant EN81-71 cat 2
    • Large range of pressel legends
    • Standard pressels are a stainless steel plate moulded with red or grey polycarbonate
    Quick view
    Close

    US91-15 Pushbutton

    The US91-15 Braille Pushbutton meets all the requirements of the visually impaired. As well as the 15mm high tactile legend, Standard English Braille dots are embossed onto the pushbutton. The illuminated tactile legend provides clear identification and the button can be illuminated in a wide variety of colours.
    • 15mm tactile legend with Braille
    • A halo of light between the pressel and surround via a patented hidden recess encircles the pressel and illuminates the legend
    • Legend & halo can be constantly illuminated at half intensity, switching to full intensity for indication of position or call acceptance
    • Large range of pressel legends
    • Matching range includes keyswitches, rocker switches and indicators
    • Vandal resistant with stainless steel front
    • Meets EN81-1/2, EN81-71 (Category 2), EN81-72, EN81-73, EN60529 (IP54), AS1735 Part12 with H/C surround & dual illumination
    Quick view
    Close

    US91-EN Pushbutton

    The US91-EN Pushbutton is a classic circular button designed to meet the requirements of EN81-70. The black background to the pressel provides a clear contrast to the tactile legend and also to the faceplate as required by EN81-70. On call acceptance the legend itself illuminates brightly and you have the choice of many colour options.
    • 15mm high tactile legend
    • High contrast between legend and pressel
    • Legend and halo illumination
    • Vandal resistant EN81-71 cat 2
    • Large range of pressel legends
    • Standard pressels are a black plate moulded with opal polycarbonate
    Quick view
    Close

    M-20 RET Pushbutton

    The M-20 RET pushbutton has been designed as a flexible, all purpose lift pushbutton, ideal for apartment buildings, offices, hotels and many other applications. The button fully meets the requirements of EN81-70, having contrast between the legend and pressel. The M-20 has a very low profile and requires no studs to fix to the faceplate. It also has a wide range of illumination options, with both the legend and halo able to be illuminated separately.
    • No studding required
    • Separate legend and halo illumination
    • Large range of pressel legends
    • High contrast ratio between pressel and legend
    • 15mm high tactile legend (Moulded through)
    • Meets EN81-70
    Quick view