12 Way Call Module
In order to interface to the elevator control panel, we provide an interface card.
Mounted either, on the car top or in the COP, a 12 Way interface Call Module is required for the system operation. It is used to interface call and acceptance inputs and outputs, between the Touch Panel and the lift control panel. It comes with a power supply and a 3m Ethernet cable, long enough to connect anywhere on the car.
- Dimension (in DIN carrier) 200 x 118 x 55mm
- Maximum Input Voltage 110 a.c / d.c
- Input short circuit protection – Yes
- Mounting options – DIN rail / Stud
Related products
US1 Touch Panel
The new Dewhurst US1 Touch Panel is a futuristic alternative to traditional pushbuttons. it allows you to create your own style of pushbutton on the touch screen with a background that fulfils your vision and enhances your corporate brand and identity.
The US1 hardware is available in 3 sizes 21.5”, 18.5” and 15.6” displays with PCAP touch screen that allows users to activate the touch screen effortlessly with finger, glove or conductive stylus. The CPU is an ARM processor with plenty of power to display full HD 1080p video content on the screen. The whole unit is neatly self-contained in its housing and is less than 35mm in depth.
Part of the package is an exclusive programming tool that allows our customers to update content independently such as text, video, images and general tenant information. At a later date they can load any changes in just a few seconds over network using the LAN cable or with a USB flash drive that plugs in at the back of the panel.
En Pad Keypad
To comply with code and deliver a solution to the handicap access requirements, we have designed a special keypad that respects the international lift standards. This keypad is an alternate method by which passengers can key in their desired floor.
There are two format options for our En-Pad keypad: a 4x3 layout with a bar button at the base, or a 4x4 layout. Both offer numerous options and bespoke designs are available for the non-numeric keys in order to match your needs. We recommend that the standard “Door Open”, “Door Close” and “Alarm” functions should remain as conventional pushbuttons positioned below the touch panel for safety reasons.
28 Way Call Module
The 28 Input Module is an expansion module for the Touch Panel. It can be mounted either on the car top or in the COP. It can be used to interface position, direction and information outputs from the lift control panel to the Touch Panel.
- Dimension (in DIN carrier) 185 x 118 x 55mm
- Maximum Input Voltage 24V a.c / d.c
- Input short circuit protection – Yes
- Mounting options – DIN rail / Stud
